Bowl Reversing Jaws for Nexus3 Lathe - Various Sizes

Charnwood Reversing Jaws for Nexus 3 Lathe - Various Sizes

Charnwood Reversing Jaws for Nexus 3 Lathe - Various Sizes

Available in:

• 5" - The outer edge of the jaws are 120mm diameter when closed, 147mm diameter when opened. The work piece is held in place by 8 rubber coated fixings which can be fitted in 3 different positions, in 12mm intervals, depending on the diameter required. A chuck with minimum Jaw travel of 24mm is therefore required to use these jaws.

For bowl diameters from 54mm up to 125mm.

Please note max. rpm 600.

• 8" - The outer edge of the jaws are 184mm diameter when closed, 211mm diameter when opened. The work piece is held in place by 8 rubber coated fixings which can be fitted in 4 different positions, in 19mm intervals, depending on the diameter required. A chuck with minimum Jaw travel of 38mm is therefore required to use these jaws.

For bowl diameters from 45mm up to 185mm.

Please note max. rpm 600

• 10" - The outer edge of the jaws are 210mm diameter when closed, 237mm diameter when opened. the work piece is held in place by 8 rubber coated fixings. They can be fitted in 7 different positions, in 12mm intervals, depending on the diameter required. A chuck with minimum Jaw travel of 24mm is therefore required to use these jaws.

For bowl diameters from 45mm up to 217mm.

Please note max. rpm 600.

Bowl Reversing Jaws for Nexus3 Chuck.

N Type jaws are designed for use with our Nexus3 chuck as well as some other brands.

Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks.

• Supplied with 2 sets of rubber coated fixings;

  • 8 x 10mm diameter x 17mm long

  • 8 x 10mm diameter x 13mm long

Jaws for the Nexus3 are compatible with the following chucks:

Charnwood Nexus3 (Use existing Jaw Screws)

Supernova (Requires N3JS, 8 piece Jaw Screw Set)

G3 Nova (Requires N3JS, 8 piece Jaw Screw Set)

Robert Sorby Patriot (Requires N3JS, 8 piece Jaw Screw Set)

Record Power SC3 (Requires N3JS, 8 piece Jaw Screw Set)

Record Power SC4 (Requires N3JS, 8 piece Jaw Screw Set)

Axminster Evolution SK114 (Requires N3JS Screws, 8 piece Jaw Screw Set)

Axminster Clubman SK100 (Requires N3JS Screws, 8 piece Jaw Screw Set)

Axminster Clubman SK80 (Requires N3JS Screws, 8 piece Jaw Screw Set)

(All Axminster chucks require their 506505 carriers)

Please note: All dimensions stated are when fitted to a Charnnwood Nexus3 chuck. When these jaws are fitted to a compatible chuck, the dimensions will change, depending upon the amount of jaw travel it has.